BACK DOOR CLOSER SYSTEM > DATA LIST / ACTIVE TEST |
| DATA LIST |
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Read the DATA LIST according to the display on the tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Half Latch SW | Back door lock half-latch switch signal / ON or OFF | ON: Back door is not completely closed OFF: Back door is closed | - |
| Full Latch SW | Back door lock full-latch switch signal / ON or OFF | ON: Back door is open OFF: Back door is closed | - |
| Door Lock Status | Back door position switch signal / UNLOCK or LOCK | UNLOCK: Back door is unlocked LOCK: Back door is locked | - |
| PBD SW Operation | Power back door switch operation (Satellite switch) / 0.8s or ON* | 0.8s: Satellite switch 0.8sec.-press (long press) operates power back door ON*: Satellite switch 1-press operates power back door | - |
| ACTIVE TEST |
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Perform the ACTIVE TEST according to the display on the tester.
| Tester Display | Test Part | Control Range |
| Latch Release | Back door lock latch is release OFF / ON | - |