Home
›
BODY
›
ENGINE HOOD / DOOR
›
POWER BACK DOOR WARNING BUZZER
POWER BACK DOOR WARNING BUZZER > INSPECTION
for Preparation
Click here
1. POWER BACK DOOR WARNING BUZZER
Check the resistance of the buzzer.
Resistance:
Terminal No.
Specified Condition
1 - 2
Approx.1 kΩ
If the result is not as specified, replace the buzzer.
NOTICE:
The circuit that causes the buzzer to sounds is built into the back door ECU, not around the buzzer.
Directly applying battery voltage to the buzzer does not cause the buzzer to sound.