Home › BODY › ENGINE HOOD / DOOR › BACK DOOR SUPPORT

BACK DOOR SUPPORT > INSTALLATION

for Preparation Click here



1. REMOVE BACK DOOR STAY SUB-ASSEMBLY LH
  1. Install the stay with the bolts to the door panel.

    Torque:
    19.5 N*m{ 200 kgf*cm , 14 ft.*lbf } for door side

  1. Install the stay with the 2 bolts to the body panel.

    Torque:
    17.5 N*m{ 180 kgf*cm , 13 ft.*lbf } for body side