Home › BODY › WINDSHIELD / WINDOWGLASS › REAR SIDE WINDOW GLASS

REAR SIDE WINDOW GLASS > REMOVAL

for Preparation Click here


HINT:
On the RH side, use the same procedures as on the LH side.



1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

HINT:
  1. Captain seat type: Click here
  2. Center seat type: Click here



2. REMOVE REAR DOOR WEATHERSTRIP LH


3. REMOVE ROPE HOOK ASSEMBLY


4. REMOVE BACK DOOR SCUFF PLATE


    B066499E01
  1. Remove the 3 bolts.

  1. Using a screwdriver, disengage the 6 clips and remove the scuff plate.

    HINT:
    Tape the screwdriver tip before use.



5. REMOVE ROOF HEADLINING GARNISH REAR


6. REMOVE REAR DOOR SCUFF PLATE LH


7. REMOVE QUARTER TRIM PANEL ASSEMBLY LH


8. REMOVE RR WINDOW SIDE GARNISH ASSEMBLY NO.2 LH


9. REMOVE RR WINDOW SIDE GARNISH ASSEMBLY LH


10. REMOVE SIDE WINDOW ASSEMBLY REAR LH


    B067570E01
  1. Disconnect the connectors.

  1. Remove the 2 nuts and 2 bolts.

    Torque:
    Bolt:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Remove the window.



11. REMOVE POWER VENT WINDOW MOTOR ASSEMBLY LH (POWER WINDOW TYPE)


    B067572
  1. Using a screwdriver, remove the window motor.



12. REMOVE QUARTER WINDOW LOCK ASSEMBLY LH (MANUAL WINDOW TYPE)
  1. Remove the screw and window lock.



13. REMOVE SIDE REAR WINDOW WEATHERSTRIP LH