AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) > ACTUATOR CHECK |
| ACTUATOR CHECK |
![]() |
After entering the DTC check mode (Sensor Check Mode), press the R/F switch.
As each damper, motor and relay automatically operate actuator check at 1-second intervals from step No. 1 to No. 10 continuously, check the temperature and air flow visually and by hand.
If the slower display is desired, press the DEF switch and change it to step operation. Each time the DEF switch is pressed, the display changes by 1 step.
| Step No. | Display code | Conditions | |||||||
| Fr. Blower level | Fr. Air flow vent | Air inlet damper | Magnetic clutch | Fr. Driver, passenger side air mix damper | Rr. Blower level | Rr. Air flow vent | Rr. Air mix damper | ||
| 1 | 0 | 0 | FACE | FRESH | OFF | "COOL" side (Full closed) | 0 | FACE1 | "COOL" side (Full closed) |
| 2 | 1 | 1 | FACE | FRESH | OFF | "COOL" side (Full closed) | 1 | FACE1 | "COOL" side (Full closed) |
| 3 | 2 | 16 | FACE | FRESH | ON | "COOL" side (Full closed) | 10 | FACE1 | "COOL" / "HOT" (40% open) |
| 4 | 3 | 16 | FACE | FRESH / RECIRCULATION | ON | "COOL" side (Full closed) | 10 | FACE2 | "COOL" / "HOT" (40% open) |
| 5 | 4 | 16 | FACE | RECIRCULATION | ON | "COOL" / "HOT" (50% open) | 10 | B/L | "COOL" / "HOT" (40% open) |
| 6 | 5 | 16 | B/L | RECIRCULATION | ON | "COOL" / "HOT" (50% open) | 10 | B/L | "COOL" / "HOT" (60% open) |
| 7 | 6 | 16 | FOOT | RECIRCULATION | ON | "HOT" side (Full open) | 10 | B/L | "COOL" / "HOT" (60% open) |
| 8 | 7 | 16 | FOOT | RECIRCULATION | ON | "HOT" side (Full open) | 10 | FOOT | "COOL" / "HOT" (60% open) |
| 9 | 8 | 16 | FOOT / DEF. | RECIRCULATION | ON | "HOT" side (Full open) | 10 | FOOT | "COOL" / "HOT" (86.5% open) |
| 10 | 9 | 31 | DEF. | RECIRCULATION | ON | "HOT" side (Full open) | 31 | FOOT | "COOL" / "HOT" (86.5% open) |