Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REFRIGERANT

REFRIGERANT > REPLACEMENT

for Preparation Click here



1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
  1. Turn the A/C switch to ON.

  1. Operating the cooler compressor at the engine rpm of approx. 1,000 for 5 to 6 minutes, circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor as much as possible.

  1. Stop the engine.

  1. Recover the refrigerant from the A/C system using a refrigerant recovery unit.



2. CHARGE REFRIGERANT
  1. Using a vacuum pump, perform a vacuum purging.



  1. Charge refrigerant, HFC-134a (R134a).

    Standard:
    780 +- 30 g (27.5 +- 1.06 oz.)

    SST
    07110-58060   (07117-58060, 07117-58070, 07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)


    I030082E10



3. WARM UP ENGINE


4. INSPECT REFRIGERANT LEAK
  1. Using a gas leak detector, check for leakage of the refrigerant.