Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY WITH PASSENGER AIRBAG ASSEMBLY

HINT:
Refer to the instructions for removal of the instrument panel sub-assembly w/ passenger airbag assembly (Click here).



2. REMOVE HEATER TO FOOT DUCT NO.1


    I035500
  1. Remove the clip and the heater to foot duct No. 1.



3. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY (w/ Stereo Compartment Amplifier)
  1. Disconnect the connectors.



    I035579
  1. Remove the 2 nuts and the stereo component amplifier assembly.



4. REMOVE ECM


    A162672
  1. Disconnect the 5 ECM connectors.

  1. Remove the 2 nuts and ECM.



5. REMOVE BLOWER ASSEMBLY


    I035501E01
  1. Release the 2 clamps, the 2 nuts and the wire harness.



    I035743
  1. Remove the bolt, the 2 screws and the nut.

  1. Remove the blower assembly.