Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR REFINER ELEMENT


    I035748E01
  1. Release the 2 claw fittings and remove the air filter sub-assembly.



    I035141
  1. Remove the air refiner element from the air filter cover plate.



2. REMOVE COOLING UNIT DAMPER SERVO SUB-ASSEMBLY


    I035502
  1. Remove the 3 screws and the cooling unit damper servo sub-assembly.



3. REMOVE BLOWER RESISTOR (for Manual Air Conditioning System)


    I036015
  1. Remove the 2 screws and the blower resistor.



4. REMOVE BLOWER MOTOR CONTROL (for Automatic Air Conditioning System)


    I035503
  1. Remove the 2 screws and the blower motor control.



5. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    I035504
  1. Remove the 3 screws and the blower w/ fan motor sub-assembly.