Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT (for Rear Air Conditioning System)

BLOWER UNIT (for Rear Air Conditioning System) > DISASSEMBLY

for Preparation Click here



1. REMOVE COOLER THERMISTOR NO.1 (for Automatic Air Conditioning System)


    I035490E01
  1. Disengage the 2 claw fittings and the clamp and remove the cooler thermistor No. 1.



2. REMOVE COOLING UNIT MOTOR SUB-ASSEMBLY WITH FAN


    I044285
  1. Remove the 3 screws and the cooling unit motor sub-assembly w/ fan.



3. REMOVE BLOWER RESISTOR TRANSISTOR ASSEMBLY


    I035492
  1. Remove the 2 screws and the blower resistor transistor assembly.



4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


    I035497E01
  1. Disengage the claw fitting and remove the 3 screws and blower case.



    E055396
  1. Remove the 2 screws and the 2 clamps.



    E055397
  1. Remove the 3 screws and the heater water valve assembly.

  1. Remove the 2 O-rings from the heater water valve assembly.



    E062465
  1. Remove the heater radiator unit sub-assembly from the air conditioning blower assembly.