Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT (for Rear Air Conditioning System)

BLOWER UNIT (for Rear Air Conditioning System) > REASSEMBLY

for Preparation Click here



1. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY


    E062465
  1. Install the heater radiator unit sub-assembly to the air conditioning blower assembly.

  1. Install the 2 O-rings to the heater water valve assembly.



    E055397
  1. Install the 3 screws and the heater water valve assembly.



    E055396
  1. Install the 2 screws and the 2 clamps.



    I035497E01
  1. Engage the claw fitting and install the 3 screws and blower case.



2. INSTALL BLOWER RESISTOR TRANSISTOR ASSEMBLY


    I035492
  1. Install the 2 screws and the blower resistor transistor assembly.



3. INSTALL COOLING UNIT MOTOR SUB-ASSEMBLY WITH FAN


    I044285
  1. Install the 3 screws and the cooling unit motor sub-assembly w/ fan.



4. INSTALL COOLER THERMISTOR NO.1 (for Automatic Air Conditioning System)


    I035490E01
  1. Engage the 2 claw fittings and the clamp and install the cooler thermistor No. 1.