Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR MIX CONTROL SERVO MOTOR (for Rear Air Conditioning System)

AIR MIX CONTROL SERVO MOTOR (for Rear Air Conditioning System) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT REAR AIR MIX CONTROL SERVO MOTOR


    E145192E03
  1. Inspect servo motor operation.

    1. Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5, then check that the arm turns to "HOT" side smoothly.

    2. Connect the positive (+) lead from the battery to terminal 5 and negative (-) lead to terminal 4, then check that the arm turns to "COOL" side smoothly.
      If the operations are not as specified, replace the rear radiator unit sub-assembly (rear air mix control servo motor).