Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › COMPRESSOR AND MAGNETIC CLUTCH

COMPRESSOR AND MAGNETIC CLUTCH > DISASSEMBLY

for Preparation Click here



1. REMOVE MAGNETIC CLUTCH ASSEMBLY
  1. Place the compressor and magnetic clutch in a vise.



    E145256
  1. Using locking pliers, hold the magnetic clutch hub.

  1. Remove the bolt, magnetic clutch hub, and magnetic clutch washers.

    HINT:
    There is no set number of magnetic clutch washers because they are used for adjustment.



    E145258
  1. Using a snap ring expander, remove the snap ring and magnetic clutch rotor.

    NOTICE:
    Take care not to damage the seal cover of the bearing when removing the snap ring.

  1. Remove the screw and disconnect the connector.



    E145259
  1. Using a snap ring expander, remove the snap ring and magnetic clutch stator.