Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > REASSEMBLY

for Preparation Click here



1. INSTALL COOLER DRYER


    I032994
  1. Using needle nose pliers, install the cooler dryer.



    E055408
  1. Install a new O-ring on the cap.

  1. Sufficiently apply compressor oil to the fitting surfaces of the O-ring and the cap.

    Compressor oil:
    ND-OIL 8 or equivalent



    I032993E06
  1. Using a hexagon wrench 14 mm (0.55 in.), install the cap to the cooler condenser assembly.

    Torque:
    2.9 N*m{ 30 kgf*cm , 25 in.*lbf }