Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLER CONDENSER CORE
  1. If the fin of the cooler condenser core is dirty, clean it with water and dry it with compressed air.

    NOTICE:
    Do not damage the fin of the cooler condenser core.

  1. If the fin of the cooler condenser core is bent, make it straight using a screwdriver or pliers.



2. INSPECT CONDENSER FOR LEAKAGE OF REFRIGERANT
  1. Using a halogen leak detector, check the pipe joints for gas leakage.

  1. If gas leakage is detected in a joint, check the torque of the joint.