Home › BODY › SEAT › SEAT HEATER SYSTEM

SEAT HEATER SYSTEM > INSPECTION

for Preparation Click here



1. INSPECT SEAT HEATER SWITCH LH


    B087782E01
  1. Measure the resistance of the seat heater switch when the switch is operated.

    Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 - 3
    ON
    (min.)
    2.72 to 4.08 Ω
    2 - 3
    ON
    (max.)
    0.28 to 0.42 Ω
    3 - 4
    ON
    (min.)
    Below 1 Ω
    3 - 4
    ON
    (max.)
    Below 1 Ω
    2 - 3
    OFF
    10 kΩ or higher
    3 - 4
    OFF
    10 kΩ or higher

    If the result is not as specified, replace the switch.

    HINT:
    As the dial is being turned, the resistance changes gradually.



    B068335E01
  1. Push the seat heater switch ON and check that the seat heater switch indicator illuminates when the switch is operated.

    OK:
    Measurement Connection
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 3
    Battery negative (-) → Terminal 1
    ON
    Illuminates

    If the result is not as specified, replace the switch.



    B065621E01
  1. Check the seat heater switch illumination.

    OK:
    Measurement Connection
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 6
    Battery negative (-) → Terminal 5
    Always
    Illuminates

    If the result is not as specified, replace the seat heater switch or bulb.



2. INSPECT SEAT HEATER SWITCH RH


    B087782E01
  1. Measure the resistance of the seat heater switch when the switch is operated.

    Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 - 3
    ON
    (min.)
    2.72 to 4.08 Ω
    2 - 3
    ON
    (max.)
    0.28 to 0.42 Ω
    3 - 4
    ON
    (min.)
    Below 1 Ω
    3 - 4
    ON
    (max.)
    Below 1 Ω
    2 - 3
    OFF
    10 kΩ or higher
    3 - 4
    OFF
    10 kΩ or higher

    If the result is not as specified, replace the switch.

    HINT:
    As the dial is being turned, the resistance changes gradually.



    B068335E02
  1. Push the seat heater switch ON and check that the seat heater switch indicator illuminates when the switch is operated.

    OK:
    Measurement Connection
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 3
    Battery negative (-) → Terminal 1
    ON
    Illuminates

    If the result is not as specified, replace the switch.



    B065621E02
  1. Check the seat heater switch illumination.

    OK:
    Measurement Connection
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 6
    Battery negative (-) → Terminal 5
    Always
    Illuminates

    If the result is not as specified, replace the seat heater switch or bulb.



3. INSPECT FRONT SEAT BACK HEATER ASSEMBLY LH


    B208564
  1. Measure the resistance of the seatback heater.

    Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (77°F)
    0.4 to 1.4 Ω

    If the result is not as specified, replace the seatback heater assembly.



4. INSPECT FRONT SEAT BACK HEATER ASSEMBLY RH


    B208564
  1. Measure the resistance of the seatback heater.

    Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (77°F)
    0.4 to 1.4 Ω

    If the result is not as specified, replace the seatback heater assembly.



5. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


    B208565E01
  1. Measure the resistance of the seat cushion heater.

    Resistance:
    Tester Connection
    Condition
    Specified Condition
    A1 - B1
    20°C (77°F)
    0.7 to 1.7 Ω
    A2 - A3
    20°C (77°F)
    4.5 to 5.5 Ω
    A4 - B2
    Always
    Below 1 Ω

    If the result is not as specified, replace the seat cushion heater assembly.



6. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


    B208565E01
  1. Measure the resistance of the seat cushion heater.

    Resistance:
    Tester Connection
    Condition
    Specified Condition
    A1 - B1
    20°C (77°F)
    0.7 to 1.7 Ω
    A2 - A3
    20°C (77°F)
    4.5 to 5.5 Ω
    A4 - B2
    Always
    Below 1 Ω

    If the result is not as specified, replace the seat cushion heater assembly.