HEADLIGHT ASSEMBLY > REASSEMBLY |
| 1. INSTALL LIGHT CONTROL ECU (DISCHARGE HEADLIGHT) |
Install a new headlight leveling motor base packing.
![]() |
Install the headlight leveling motor assembly as shown in the illustration.
![]() |
Connect the connector with the claw.
![]() |
Install the light control ECU with the 2 screws.
Install a new headlight gasket.
![]() |
Install the headlight cover with the 4 screws.
| 2. INSTALL FRONT SIDE MARKER LIGHT BULB |
Install the side marker light bulb to the side marker light socket.
![]() |
Turn in the direction indicated by the arrow and install the side marker light bulb and side marker light socket as a unit.
| 3. INSTALL FRONT TURN SIGNAL LIGHT BULB |
Install the front turn signal light bulb to the front turn signal light socket.
![]() |
Turn in the direction indicated by the arrow and install the front turn signal light bulb and front turn signal light socket as a unit.
| 4. INSTALL NO. 2 HEADLIGHT BULB |
![]() |
Turn in the direction indicated by the arrow and install the No.2 headlight bulb.
| 5. INSTALL DISCHARGE HEADLIGHT BULB (DISCHARGE HEADLIGHT) |
![]() |
Install the discharge headlight bulb with the set spring as shown in the illustration.
![]() |
Turn in the direction indicated by the arrow and install the socket.
![]() |
Turn in the direction indicated by the arrow and install the headlight socket cover.
| 6. INSTALL NO. 1 HEADLIGHT BULB (HALOGEN HEADLIGHT) |
![]() |
Turn in the direction indicated by the arrow and install the No.1 headlight bulb.