FRONT BUMPER > DISASSEMBLY |
| 1. REMOVE FRONT BUMPER ENERGY ABSORBER |
| 2. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
![]() |
Remove the 6 bolts and the front bumper reinforcement sub-assembly.
| 3. REMOVE FRONT BUMPER SIDE SUPPORT LH |
![]() |
Remove the screw.
Disengage the 2 clips and remove the front bumper side support LH.
| 4. REMOVE FRONT BUMPER SIDE SUPPORT RH |
| 5. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER |
![]() |
Remove the No. 1 ultrasonic sensor retainer as shown in the illustration.
| 6. REMOVE NO. 1 ULTRASONIC SENSOR (LH side) (w/ Clearance Sonar System) |
![]() |
Disconnect the connector and remove the No. 1 ultrasonic sensor.
| 7. REMOVE NO. 1 ULTRASONIC SENSOR (RH side) (w/ Clearance Sonar System) |
| 8. REMOVE RADIATOR GRILLE |
![]() |
Remove the 2 bolts and the 2 screws.
Disengage the 4 claws and remove the radiator grille from the front bumper cover.
| 9. REMOVE UPPER RADIATOR GRILLE |
![]() |
Disengage the 10 claws and remove the upper radiator grille from the radiator grille.
| 10. REMOVE FRONT BUMPER EMBLEM |
![]() |
Disengage the 3 claws and remove the front bumper emblem from the upper radiator grille.
| 11. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
![]() |
Disengage the 2 pins and remove the front bumper hole cover LH from the front bumper cover.
| 12. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
| 13. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
![]() |
Disengage the 2 claws
Disengage the 2 pins and remove the fog light assembly.
| 14. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
| 15. REMOVE LOWER RADIATOR GRILLE |
![]() |
Disengage the 16 claws and remove the lower radiator grille from the front bumper cover.