Home › BODY ELECTRICAL › LIGHTING › IGNITION KEY CYLINDER LIGHT

IGNITION KEY CYLINDER LIGHT > ON-VEHICLE INSPECTION

for Preparation Click here



1. KEY CYLINDER LIGHT ASSEMBLY


    I035769
  1. Connect the battery positive (+) lead to the terminal 1 and the battery negative (-) lead to the terminal 2, and check that the indicator light comes on.



2. TRANSPONDER KEY AMPLIFIER


    E066577
  1. Inspect key cylinder light operation.

    1. Connect the battery positive (+) lead to the terminal 2 and the battery negative (-) lead to the terminal 6, and check that the indicator light comes on.