Home › BODY ELECTRICAL › LIGHTING › VANITY LIGHT

VANITY LIGHT > ON-VEHICLE INSPECTION

for Preparation Click here



1. LH VISOR ASSEMBLY
  1. Inspect vanity light resistance.

    1. check that the resistance exists between the terminal 1 and the terminal 2 when the light is operated.

      Resistance:
      OFF (closed):
      10 kΩ or higher
      ON (opened):
      Below 1 Ω



2. RH VISOR ASSEMBLY
  1. Inspect vanity light resistance.

    1. check that the resistance exists between the terminal 1 and the terminal 2 when the light is operated.

      Resistance:
      OFF (closed):
      10 kΩ or higher
      ON (opened):
      Below 1 Ω