HEADLIGHT LEVELING SWITCH > ON-VEHICLE INSPECTION |
| 1. HEADLIGHT LEVELING SWITCH |
![]() |
Connect the battery positive (+) lead to the terminal 1 and the battery negative (-) lead to the terminal 5.
Measure the resistance between the terminal 4 and the battery negative (-) lead when headlight leveling switch is operated.
Measure the resistance between the terminal 5 and the battery negative (-) lead when headlight leveling switch is operated.
| Switch position | Specified voltage (V) |
| 0 | 9.0 to 12.6 |
| 1 | 7.9 to 11.1 |
| 2 | 6.9 to 9.6 |
| 3 | 5.8 to 8.2 |
| 4 | 4.7 to 6.6 |
| 5 | 3.7 to 5.1 |
Inspect switch illumination.
![]() |
Connect the battery positive (+) lead to the terminal 3 and the battery negative (-9 lead to the terminal 6, and check that the illumination comes on.