Home › BODY ELECTRICAL › LIGHTING › STOP LIGHT SWITCH

STOP LIGHT SWITCH > ON-VEHICLE INSPECTION

for Preparation Click here



1. STOP LIGHT SWITCH ASSEMBLY


    E065594E38
  1. Check the resistance between the terminals at each switch position as shown ion the chart.

    Resistance:
    Tester connection
    Switch operation
    Specified condition
    1 - 2
    Switch pin free
    Below 1 Ω
    1 - 2
    Switch pin pushed in
    10 kΩ or higher
    3 - 4
    Switch pin free
    10 kΩ or higher
    3 - 4
    Switch pin pushed in
    Below 1 Ω