Home › ENGINE › 2GR-FE STARTING › STARTER

STARTER > INSTALLATION

for Preparation Click here



1. INSTALL STARTER ASSEMBLY


    A160252
  1. Install the starter with the 2 bolts.

    Torque:
    37 N*m{ 380 kgf*cm , 26 ft.*lbf } for bolt



    A160251
  1. Connect the starter connector.

  1. Install the terminal nut and cover the nut with the cap.

    Torque:
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf } for nut



2. INSTALL NO. 1 AIR CLEANER INLET


    A160253
  1. Install the No. 1 air cleaner inlet with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



3. INSTALL AIR CLEANER BRACKET


    A155041
  1. Remove the 2 bolts and air cleaner bracket.

    Torque:
    7.8 N*m{ 80 kgf*cm , 69 in.*lbf }



4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    A155039
  1. Install the air cleaner case with the 3 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Connect the vacuum hose.

  1. Connect the vacuum switching valve connector.



5. INSTALL AIR CLEANER FILTER ELEMENT
  1. Install the air cleaner filter element sub-assembly.



6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    A163204
  1. Install the 2 bolts and air cleaner cap sub-assembly.



    A135113E01
  1. Connect the No. 2 ventilation hose and air cleaner hose band.

  1. Connect the vacuum hose (EVAP) to the air cleaner hose.



    A135112E01
  1. Connect the 3 vacuum hoses.



7. INSTALL NO. 2 AIR CLEANER INLET


    A133004
  1. Install the No. 2 air cleaner inlet with the 2 clamps and 2 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



8. INSTALL BATTERY


    A155033
  1. Install the battery and battery tray.

  1. Install the battery clamp with the bolt and nut.

    Torque:
    Bolt:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }
    Nut:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }

  1. Connect the positive battery terminal.

  1. Connect the negative battery terminal.