STARTER > REMOVAL |
| 1. REMOVE BATTERY |
![]() |
Disconnect the negative battery terminal.
Disconnect the positive battery terminal.
Loosen the nut, and remove the bolt and battery clamp.
Remove the battery and battery tray.
| 2. REMOVE NO. 2 AIR CLEANER INLET |
![]() |
Disconnect the vacuum switching valve clamp.
Disconnect the 2 vacuum hoses.
Remove the 2 bolts and No. 2 air cleaner inlet.
| 3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Disconnect the 3 vacuum hoses.
![]() |
Remove the No. 2 ventilation hose and air cleaner hose band.
Disconnect the vacuum hose (EVAP) from the air cleaner hose.
![]() |
Remove the 2 bolts and air cleaner cap sub-assembly.
| 4. REMOVE AIR CLEANER FILTER ELEMENT |
Remove the air cleaner filter element sub-assembly.
| 5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY |
![]() |
Disconnect the vacuum switching valve connector.
Disconnect the vacuum hose.
Remove the 3 bolts and air cleaner case.
| 6. REMOVE AIR CLEANER BRACKET |
![]() |
Remove the 2 bolts and the air cleaner bracket.
| 7. REMOVE NO. 1 AIR CLEANER INLET |
![]() |
Remove the bolt and the No. 1 air cleaner inlet.
| 8. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the starter connector.
Open the terminal cap and remove the nut and the starter wire.
![]() |
Remove the 2 bolts and the starter.