Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    63-46    Scratched / Reversed Disc

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
63-46
Scratches or dirt is found on CD surface or CD is set upside down.
  1. CD
  2. Navigation receiver assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK THAT CD IS INSERTED PROPERLY
  1. Check that the CD is not inserted upside down.

    OK:
    CD is properly inserted.



NG
INSERT CD PROPERLY
OK


2.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformations or cracks on the disc.



NG
CHANGE DISC
OK


3.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to outside in a radial direction.

      NOTICE:
      Do not use conventional record cleaner or anti-static preservative.


NEXT


4.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


5.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



OK
END
NG


6.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another and recheck.

    1. Replace the disc with another normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY
OK

END