ACCESSORY METER > INSTALLATION |
| 1. INSTALL ACCESSORY METER ASSEMBLY |
![]() |
Using torx socket wrench (T10), install the accessory meter assembly with the 5 screws.
| 2. INSTALL ROOF CONSOLE BOX ASSEMBLY |
![]() |
Temporarily install the 2 screws to the retainer.
Set the console box, as shown in the illustration.
Slide the console box in the direction indicated by the arrow mark in the illustration so that the screws can meet the keyholes.
Tighten the 2 screws.
Tighten the 2 torx screws.