Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY

PERSONAL LIGHT ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. ROOF CONSOLE BOX ASSEMBLY


    I035770E01
  1. Inspect map light assembly resistance.

    1. Check the resistance between the terminals at each switch position as shown in the chart.

      Resistance:
      Switch operation
      Tester connection
      Specified condition
      OFF
      -
      10 kΩ or higher
      DOOR
      2 - 3
      Below 1 Ω
      ON
      1 - 2
      Below 1 Ω