Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR GARNISH CENTER (w/ Rear Spoiler)


    B069688E01
  1. Using a clip remover, disengage the 5 clips and remove the garnish center.



2. REMOVE REAR SPOILER COVER (w/ Rear Spoiler)
  1. Disconnect the center stop light connector.



    B067744
  1. Remove the 3 nuts.

  1. Using a clip remover, disengage the 2 clips to remove the rear spoiler.



3. REMOVE CENTER STOP LIGHT ASSEMBLY


    I035548
  1. w/o Rear spoiler:

    1. Disconnect the connector and remove the 2 screws and the center stop light assembly.



    I033910E01
  1. w/ Rear spoiler:

    1. Install the strap on the connector of the center stop light assembly.



    I036806
  1. w/ Rear spoiler:

    1. Remove the 2 screws.

  1. w/ Rear spoiler:

    1. Pass the connector through the inside of the rear spoiler sub-assembly, and remove the center stop light assembly.

      HINT:
      Leave the strap inside the rear spoiler sub-assembly.