BACK-UP LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL BACK-UP LIGHT ASSEMBLY |
![]() |
Connect the connector.
Install the back-up light assembly with the 4 nuts and 2 claws.
| 2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY |
| 3. INSTALL BACK DOOR PULL STRAP |
| 4. INSTALL BACK DOOR STRAP COVER |
| 5. INSTALL BACK DOOR SIDE GARNISH RH |
| 6. INSTALL BACK DOOR SIDE GARNISH LH |
| 7. INSTALL BACK DOOR GARNISH CENTER |