Home › SUSPENSION & AXLE › SUSPENSION › FRONT SHOCK ABSORBER WITH COIL SPRING

FRONT SHOCK ABSORBER WITH COIL SPRING > DISPOSAL

for Preparation Click here



1. DISPOSE OF SHOCK ABSORBER ASSEMBLY FRONT LH

HINT:
Dispose the RH side by the same procedures as the LH side.

  1. Fully extend the shock absorber rod.



    F045557E01
  1. Using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside.

    CAUTION:
    1. When drilling, chips may fly out, work carefully.
    2. The gas is colorless, odorless and non-poisonous.