Home › SUSPENSION & AXLE › SUSPENSION › FRONT SHOCK ABSORBER WITH COIL SPRING

FRONT SHOCK ABSORBER WITH COIL SPRING > REASSEMBLY

for Preparation Click here



1. INSTALL SHOCK ABSORBER ASSEMBLY FRONT LH


2. INSTALL FRONT COIL SPRING INSULATOR LOWER LH
  1. Install the front coil spring insulator lower LH onto the shock absorber assembly front LH.



3. INSTALL FRONT SPRING BUMPER LH
  1. Install the front spring bumper LH to the piston rod.



4. INSTALL FRONT COIL SPRING LH


    F040160E01
  1. Using SST, compress the front coil spring LH.

    SST
    09727-30021   (09727-00010, 09727-00021, 09727-00031)

    NOTICE:
    Do not use an impact wrench. It will damage the SST.

    HINT:
    Use 2 SST of the same type.

  1. Install the front coil spring LH to the shock absorber assembly front LH.

    HINT:
    Fit the front coil spring insulator lower LH into the gap of the shock absorber assembly front LH.



5. INSTALL FRONT COIL SPRING INSULATOR UPPER LH


    F040168E01
  1. Install the front coil spring insulator upper LH as shown in the illustration.



6. INSTALL FRONT COIL SPRING SEAT UPPER LH


    F040161E02
  1. Install the front coil spring seat upper LH to the shock absorber assembly front LH with the mark facing to the outside of the vehicle.



7. INSTALL FRONT SUSPENSION SUPPORT LH BEARING


    F040162
  1. Install the front suspension support LH bearing.



8. INSTALL FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH


    F040169E01
  1. Install the front suspension support sub-assembly LH with the mark facing to the outside of the vehicle.

  1. Temporarily tighten a new lock nut.