Home › SUSPENSION & AXLE › SUSPENSION › FRONT LOWER SUSPENSION ARM

FRONT LOWER SUSPENSION ARM > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH
  1. Install the front lower arm bush stopper to the front suspension arm sub-assembly lower No.1 LH.



    F044965
  1. Install the bolt and nut to the rear side of the front suspension arm sub-assembly lower No.1 LH.

    Torque:
    206 N*m{ 2,100 kgf*cm , 152 ft.*lbf }



    F044964
  1. Install the 2 bolts on the front side of the front suspension arm sub-assembly lower No.1 LH.

    Torque:
    200 N*m{ 2,040 kgf*cm , 148 ft.*lbf }



2. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR


    C083387
  1. Install the transverse engine engine mounting insulator with the 3 nuts.

    Torque:
    87 N*m{ 887 kgf*cm , 64 ft.*lbf }



3. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

HINT: