FRONT LOWER SUSPENSION ARM > REMOVAL |
| 1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE |
| 2. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR |
![]() |
Remove the 3 nuts and transverse engine engine mounting insulator.
| 3. REMOVE FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH |
![]() |
Remove the 2 bolts on the front side of the front suspension arm sub-assembly lower No.1 LH.
![]() |
Remove the bolt and nut on the rear side of the front suspension arm sub-assembly lower No.1 LH.
Remove the front suspension arm sub-assembly lower No.1 LH.
Remove the front lower arm bush stopper from the front suspension arm sub-assembly lower No.1 LH.