Home › BODY › INTERIOR › ROOF HEADLINING

ROOF HEADLINING > INSTALLATION

for Preparation Click here



1. INSTALL ROOF HEADLINING ASSEMBLY


    B069474E03
  1. w/ sliding roof:
    Install the roof headlining with the 5 clips.

  1. w/o sliding roof:
    Install the roof headlining with the 3 clips.

    NOTICE:
    In order to prevent the roof headlining from becoming bent, work must be performed by 2 or more persons when removing/installing it.



2. INSTALL ROOF CONSOLE BOX


    B069496E01
  1. Temporarily install the 2 screws to the retainer.

  1. Set the console box, as shown in the illustration.

  1. Slide the console box in the direction indicated by the arrow mark in the illustration so that the screws can meet the keyholes.

  1. Tighten the 2 screws.

  1. Tighten the 2 torx screws.