Home › BODY › ENGINE HOOD / DOOR › POWER BACK DOOR

POWER BACK DOOR > REASSEMBLY

for Preparation Click here



1. INSTALL BACK DOOR STOPPER LOWER
  1. Install the 2 stoppers with the 4 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



2. INSTALL BACK DOOR BASE STOPPER BRACKET
  1. Install the 2 brackets with the 4 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



3. INSTALL BACK DOOR WITH MOTOR LOCK ASSEMBLY


    B069066
  1. Install the lock with the 4 bolts.

    Torque:
    12.5 N*m{ 112 kgf*cm , 9 ft.*lbf }

  1. Reset the lock (Click here).



4. INSTALL POWER BACK DOOR TOUCH SENSOR LH


    B067786
  1. Install the touch sensor with the clip.

  1. Using a torx driver (T25), tighten the 4 screws.



5. INSTALL POWER BACK DOOR TOUCH SENSOR RH
  1. Install the touch sensor with the clip.

  1. Using a torx driver (T25), tighten the 4 screws.



6. INSTALL BACK DOOR PULL STRAP


    B067784E01
  1. Install the pull strap with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 42 in.*lbf }

  1. Install the cover.



7. INSTALL BACK DOOR STAY BRACKET UPPER LH
  1. Install the bracket upper with the 2 bolts.

    Torque:
    12.5 N*m{ 112 kgf*cm , 9 ft.*lbf }



8. INSTALL POWER BACK DOOR DRIVE UNIT


    B067785
  1. Install the drive unit with the 3 bolt.

    Torque:
    12.5 N*m{ 112 kgf*cm , 9 ft.*lbf }

  1. Reset the drive unit (Click here).