Home › BODY › ENGINE HOOD / DOOR › POWER SLIDE DOOR MAIN SWITCH

POWER SLIDE DOOR MAIN SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER SLIDE DOOR MAIN SWITCH


    B068927E01
  1. Inspect the resistance of the switch.

    Resistance:
    Terminal No.
    Condition
    Specified Condition
    4 - 5
    Free (ON)
    Below 1 Ω
    Pushed (OFF)
    10 kΩ or higher

    If the result is not as specified, replace the switch.

  1. Apply battery voltage and check the illuminates.

    Standard:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    Illuminates

    HINT:
    Whether the switch illuminates or not will not affect the function of the LH side.
    If the result is not as specified, replace the bulb.