Home › BODY › ENGINE HOOD / DOOR › POWER SLIDE DOOR TOUCH SENSOR

POWER SLIDE DOOR TOUCH SENSOR > INSPECTION

for Preparation Click here



1. INSPECT POWER SLIDE DOOR TOUCH SENSOR LH


    B068908E01
  1. Check the resistance of the sensor.

    Resistance:
    Terminal No.
    Condition
    Specified Condition
    1 - 2
    Free
    Approx. 1 kΩ
    Pressed
    Below 100 Ω

    If the result is not as specified, replace the sensor.



2. INSPECT POWER SLIDE DOOR TOUCH SENSOR RH


    B068908E01
  1. Check the resistance of the sensor.

    Resistance:
    Terminal No.
    Condition
    Specified Condition
    1 - 2
    Free
    Approx. 1 kΩ
    Pressed
    Below 100 Ω

    If the result is not as specified, replace the sensor.