Home › BODY › ENGINE HOOD / DOOR › SLIDE DOOR HALF OPEN STOPPER CONTROL ASSEMBLY

SLIDE DOOR HALF OPEN STOPPER CONTROL ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SLIDE DOOR HALF OPEN STOPPER CONTROL ASSEMBLY


    B068900E02
  1. Inspect the resistance of the switch.

    Resistance:
    Terminal No.
    Condition
    Specified Condition
    1 - 2
    ON (Fuel lid closed)
    Below 1 Ω
    OFF (Fuel lid open)
    10 kΩ or higher

    If the result is not as specified, replace the control sub-assembly.