Home › BODY › ENGINE HOOD / DOOR › POWER SLIDE DOOR WARNING BUZZER

POWER SLIDE DOOR WARNING BUZZER > INSPECTION

for Preparation Click here



1. INSPECT POWER SLIDE DOOR WARNING BUZZER LH


    B068880
  1. Check the resistance of the buzzer.

    Resistance:
    Terminal No.
    Specified Condition
    1 - 2
    Approx. 1 kΩ

    If the result is not as specified, replace the buzzer.

    NOTICE:
    1. The circuit that causes the buzzer to sound is built into the slide door ECU, not around the buzzer.
    2. Directly applying battery voltage to the buzzer does not cause the buzzer to sound.



2. INSPECT POWER SLIDE DOOR WARNING BUZZER RH


    B068880
  1. Check the resistance of the buzzer.

    Resistance:
    Terminal No.
    Specified Condition
    1 - 2
    Approx. 1 kΩ

    NOTICE:
    1. The circuit that causes the buzzer to sound is built into the slide door ECU, not around the buzzer.
    2. Directly applying battery voltage to the buzzer does not cause the buzzer to sound.

    If the result is not as specified, replace the buzzer.