Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (w/ Power Stowing Function)

REAR NO. 2 SEAT ASSEMBLY (w/ Power Stowing Function) > TERMINALS OF ECU

for Preparation Click here



POWER REAR NO. 2 SEAT ECU LH

B129718E01

  1. Disconnect the fold seat control ECU connectors.

  2. Measure the voltage and resistance of the wire harness side connectors.

    Terminal No.
    (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    P62-3 (IG) - P63-8 (GND)
    B-R - W-B
    Power source (IG)
    Ignition switch: ON
    10 to 14 V
    P62-3 (IG) - P63-8 (GND)
    B-R - W-B
    Power source (IG)
    Ignition switch: OFF
    Below 1 V
    P63-4 (+B) - P63-8 (GND)
    B - W-B
    Power source (Battery)
    Always
    10 to 14 V
    P63-8 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the fold seat control ECU connectors.

  4. Measure the voltage of the connectors.

    Terminal No.
    (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    P62-5 (BDCY) - P63-8 (GND)
    G-W - W-B
    Back door courtesy switch signal
    Back door courtesy switch: OFF
    10 to 14 V
    P62-5 (BDCY) - P63-8 (GND)
    G-W - W-B
    Back door courtesy switch signal
    Back door courtesy switch: ON
    Below 1 V
    P62-12 (RCLF) - P63-8 (GND)
    P - W-B
    Reclining seat switch signal
    Always
    10 to 14 V
    P62-12 (RCLF) - P63-8 (GND)
    P - W-B
    Reclining seat switch signal
    Fold seat switch: Forward
    Below 1 V
    P62-13 (RCLR) - P63-8 (GND)
    LG - W-B
    Reclining seat switch signal
    Always
    10 to 14 V
    P62-13 (RCLR) - P63-8 (GND)
    LG - W-B
    Reclining seat switch signal
    Fold seat switch: Backward
    Below 1 V
    P62-14 (TBL) - P63-8 (GND)
    GR-L - W-B
    Fold seat switch signal
    (Folding)
    Folding switch: OFF
    10 to 14 V
    P62-14 (TBL) - P63-8 (GND)
    GR-L - W-B
    Fold seat switch signal
    (Folding)
    Folding switch: ON
    Below 1 V
    P62-15 (RTRN) - P63-8 (GND)
    O - W-B
    Fold seat switch signal
    (Return)
    Stowing/Return switch: OFF
    10 to 14 V
    P62-15 (RTRN) - P63-8 (GND)
    O - W-B
    Fold seat switch signal
    (Return)
    Stowing/Return switch: ON
    Below 1 V
    P62-16 (FOLD) - P63-8 (GND)
    L - W-B
    Fold seat switch signal
    (Stowing)
    Stowing/Return switch: OFF
    10 to 14 V
    P62-16 (FOLD) - P63-8 (GND)
    L - W-B
    Fold seat switch signal
    (StowPowering)
    Stowing/Return switch: ON
    Below 1 V
    P62-22 (SRCL) - P62-36 (SG2)
    V-R - GR
    Seatback position sensor signal
    Motor is operating
    Below 1 V ←→ 10 to 14 V
    Pulse generation
    P62-23 (SFLD) - P63-8 (GND)
    Y-R - W-B
    Seat cushion position sensor signal
    Motor is operating
    Below 1 V ←→ 10 to 14 V
    Pulse generation
    P62-24 (SV1) - P63-8 (GND)
    G - W-B
    Power supply for seat cushion position sensor
    Back door: OPEN
    9 to 14 V
    P62-25 (SV2) - P63-8 (GND)
    Y - W-B
    Power supply for seatback position sensor
    Back door: OPEN
    9 to 14 V
    P62-30 (SG1) - Body ground
    W-L - Body ground
    Ground for seat cushion position sensor
    Always
    Below 1 V
    P62-32 (P) - P63-8 (GND)
    L-Y - W-B
    Park/Neutral position sensor signal
    Ignition switch: ON
    Park/Neutral switch: P position
    10 to 14 V
    P62-32 (P) - P63-8 (GND)
    L-Y - W-B
    Park/Neutral position sensor signal
    Ignition switch: ON
    Park/Neutral switch: Except P position
    Below 1 V
    P62-34 (IND2) - P63-8 (GND)
    R-W - W-B
    3rd SEAT indicator signal
    Ignition switch: ON
    10 to 14 V
    P62-34 (IND2) - P63-8 (GND)
    R-W - W-B
    3rd SEAT indicator signal
    Ignition switch: ON
    1. When the reclining motor or fold seat control ECU is not initialized.
    2. When any seat legs are released.
    3. When the seatback is outside the reclining operation range.
    1 to 3 V
    P62-35 (IND1) - P63-8 (GND)
    BR-Y - W-B
    Fold seat switch indicator signal
    Fold seat switch: ON
    Back door: OPEN
    1. When the system detects that an object is caught.
    2. When the seat operation conditions are not met.
    Below 1.5 V
    P62-35 (IND1) - P63-8 (GND)
    BR-Y - W-B
    Fold seat switch indicator signal
    1. When the system detects that an object is caught.
    2. When the seat operation conditions are not met.
    9 to 13 V
    P62-36 (SG2) - Body ground
    GR - Body ground
    Ground for seatback position sensor
    Always
    Below 1 V
    P62-37 (LCKR) - P63-8 (GND)
    R - W-B
    Fold lock switch signal
    Fold lock switch: LOCK
    Back door: OPEN
    10 to 14 V
    P62-37 (LCKR) - P63-8 (GND)
    R - W-B
    Fold lock switch signal
    Fold lock switch: UNLOCK
    Below 1 V
    P62-38 (LCKF) - P63-8 (GND)
    Y - W-B
    Lock switch signal
    Lock switch: LOCK
    Back door: OPEN
    10 to 14 V
    P62-38 (LCKF) - P63-8 (GND)
    Y - W-B
    Lock switch signal
    Lock switch: UNLOCK
    Below 1 V
    P63-1 (FLD+) - P63-8 (GND)
    G-W - W-B
    Folding motor operation signal
    Stowing/Return switch: Stowing
    Back door: OPEN
    Ignition switch: OFF
    Park/Neutral switch: P position
    10 to 14 V
    P63-2 (RCL+) - P63-8 (GND)
    B-Y - W-B
    Reclining motor operation signal
    Power rear No. 2 seat switch: Forward
    Back door: OPEN
    Lock switch: UNLOCK
    10 to 14 V
    P63-3 (RACT) - P63-8 (GND)
    G-B - W-B
    Release actuator operation signal
    Stowing/Return switch: Return
    Back door: OPEN
    Ignition switch: OFF
    Park/Neutral switch: P position
    10 to 14 V
    P63-5 (FLD-) - P63-8 (GND)
    R-Y - W-B
    Folding motor operation signal
    Stowing/Return switch: Return
    Back door: OPEN
    Ignition switch: OFF
    Park/Neutral switch: P position
    10 to 14 V
    P63-6 (RCL-) - P63-8 (GND)
    L-B - W-B
    Reclining motor operation signal
    Power rear No. 2 seat switch: Backward
    Back door: OPEN
    Lock switch: UNLOCK
    10 to 14 V
    If the result is not as specified, the fold seat control ECU may have a malfunction.


POWER REAR NO. 2 SEAT ECU RH

B129718E04

  1. Disconnect the fold seat control ECU connectors.

  2. Measure the voltage and resistance of the wire harness side connectors.

    Terminal No.
    (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    P64-3 (IG) - P65-8 (GND)
    B-R - W-B
    Power source (IG)
    Ignition switch: ON
    10 to 14 V
    P64-3 (IG) - P65-8 (GND)
    B-R - W-B
    Power source (IG)
    Ignition switch: OFF
    Below 1 V
    P65-4 (+B) - P65-8 (GND)
    B - W-B
    Power source (Battery)
    Always
    10 to 14 V
    P65-8 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the fold seat control ECU connectors.

  4. Measure the voltage of the connectors.

    Terminal No.
    (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    P64-5 (BDCY) - P65-8 (GND)
    G-W - W-B
    Back door courtesy switch signal
    Back door courtesy switch: OFF
    10 to 14 V
    P64-5 (BDCY) - P65-8 (GND)
    G-W - W-B
    Back door courtesy switch signal
    Back door courtesy switch: ON
    Below 1 V
    P64-12 (RCLF) - P65-8 (GND)
    P - W-B
    Reclining seat switch signal
    Always
    10 to 14 V
    P64-12 (RCLF) - P65-8 (GND)
    P - W-B
    Reclining seat switch signal
    Power rear No. 2 seat switch: Forward
    Below 1 V
    P64-13 (RCLR) - P65-8 (GND)
    LG - W-B
    Reclining seat switch signal
    Always
    10 to 14 V
    P64-13 (RCLR) - P65-8 (GND)
    LG - W-B
    Reclining seat switch signal
    Power rear No. 2 seat switch: Backward
    Below 1 V
    P64-14 (TBL) - P65-8 (GND)
    GR-L - W-B
    Fold seat switch signal
    (Folding)
    Folding switch: OFF
    10 to 14 V
    P64-14 (TBL) - P65-8 (GND)
    GR-L - W-B
    Fold seat switch signal
    (Folding)
    Folding switch: ON
    Below 1 V
    P64-15 (RTRN) - P65-8 (GND)
    O - W-B
    Fold seat switch signal
    (Return)
    Stowing/Return switch: OFF
    10 to 14 V
    P64-15 (RTRN) - P65-8 (GND)
    O - W-B
    Fold seat switch signal
    (Return)
    Stowing/Return switch: ON
    Below 1 V
    P64-16 (FOLD) - P65-8 (GND)
    L - W-B
    Fold seat switch signal
    (Stowing)
    Stowing/Return switch: OFF
    10 to 14 V
    P64-16 (FOLD) - P65-8 (GND)
    L - W-B
    Fold seat switch signal
    (Stowing)
    Stowing/Return switch: ON
    Below 1 V
    P64-22 (SRCL) - P64-36 (SG2)
    V-R - GR
    Seatback position sensor signal
    Motor is operating
    Below 1 V ←→ 10 to 14 V
    Pulse generation
    P64-23 (SFLD) - P65-8 (GND)
    Y-R - W-B
    Seat cushion position sensor signal
    Motor is operating
    Below 1 V ←→ 10 to 14 V
    Pulse generation
    P64-24 (SV1) - P65-8 (GND)
    G - W-B
    Power supply for seat cushion position sensor
    Back door: OPEN
    9 to 14 V
    P64-25 (SV2) - P65-8 (GND)
    Y - W-B
    Power supply for seatback position sensor
    Back door: OPEN
    9 to 14 V
    P64-30 (SG1) - Body ground
    W-L - Body ground
    Ground for Folding position sensor
    Always
    Below 1 V
    P64-32 (P) - P65-8 (GND)
    L-Y - W-B
    Park/Neutral position sensor signal
    Ignition switch: ON
    Park/Neutral switch: P position
    10 to 14 V
    P64-32 (P) - P65-8 (GND)
    L-Y - W-B
    Park/Neutral position sensor signal
    Ignition switch: ON
    Park/Neutral switch: Except P position
    Below 1 V
    P64-34 (IND2) - P65-8 (GND)
    R-W - W-B
    3rd SEAT indicator signal
    Ignition switch: ON
    10 to 14 V
    P64-34 (IND2) - P65-8 (GND)
    R-W - W-B
    3rd SEAT indicator signal
    Ignition switch: ON
    1. When the reclining motor or fold seat control ECU is not initialized.
    2. When any seat legs are released.
    3. When the seatback is outside the reclining operation range.
    1 to 3 V
    P64-35 (IND1) - P65-8 (GND)
    BR-Y - W-B
    Fold seat switch indicator signal
    Fold seat switch: ON
    Back door: OPEN
    1. When the system detects that an object is caught.
    2. When the seat operation conditions are not met.
    Below 1.5 V
    P64-35 (IND1) - P65-8 (GND)
    BR-Y - W-B
    Fold seat switch indicator signal
    1. When the system detects that an object is caught.
    2. When the seat operation conditions are not met.
    9 to 13 V
    P64-36 (SG2) - Body ground
    GR - Body ground
    Ground for seatback position sensor
    Always
    Below 1 V
    P64-37 (LCKR) - P65-8 (GND)
    R - W-B
    Fold lock switch signal
    Fold lock switch: LOCK
    Back door: OPEN
    10 to 14 V
    P64-37 (LCKR) - P65-8 (GND)
    R - W-B
    Fold lock switch signal
    Fold lock switch: UNLOCK
    Back door: OPEN
    Below 1 V
    P64-38 (LCKF) - P65-8 (GND)
    Y - W-B
    Lock switch signal
    Lock switch: LOCK
    10 to 14 V
    P64-38 (LCKF) - P65-8 (GND)
    Y - W-B
    Lock switch signal
    Lock switch: UNLOCK
    Below 1 V
    P65-1 (FLD+) - P65-8 (GND)
    G-W - W-B
    Folding motor operation signal
    Stowing/Return switch: Stowing
    Back door: OPEN
    Ignition switch: OFF
    Park/Neutral switch: P position
    10 to 14 V
    P65-2 (RCL+) - P65-8 (GND)
    B-Y - W-B
    Reclining motor operation signal
    Power rear No. 2 seat switch: Forward
    Back door: OPEN
    Lock switch: UNLOCK
    10 to 14 V
    P65-3 (RACT) - P65-8 (GND)
    G-B - W-B
    Release actuator operation signal
    Stowing/Return switch: Return
    Back door: OPEN
    Ignition switch: OFF
    Park/Neutral switch: P position
    10 to 14 V
    P65-5 (FLD-) - P65-8 (GND)
    R-Y - W-B
    Folding motor operation signal
    Stowing/Return switch: Return
    Back door: OPEN
    Ignition switch: OFF
    Park/Neutral switch: P position
    10 to 14 V
    P65-6 (RCL-) - P65-8 (GND)
    L-B - W-B
    Reclining motor operation signal
    Power rear No. 2 seat switch: Backward
    Back door: OPEN
    Lock switch: UNLOCK
    10 to 14 V
    If the result is not as specified, the fold seat control ECU may have a malfunction.