Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (w/ Power Stowing Function)

REAR NO. 2 SEAT ASSEMBLY (w/ Power Stowing Function) > DIAGNOSIS SYSTEM

for Preparation Click here



CHECK DLC3


    E106867
  1. The vehicle uses ISO 15765-4 communication protocol.
    The terminal arrangement of the DLC3 complies with SAE 1962 and matched the ISO 15765-4 format.

    Symbols
    (Terminal No.)
    Terminal Description
    Condition
    Specified Condition
    SIL (7) - SG (5)
    Bus "+" line
    During transmission
    Pulse generation
    CG (4) - Body ground
    Chassis ground
    Always
    Below 1 Ω
    SG (5) - Body ground
    Signal ground
    Always
    Below 1 Ω
    BAT (16) - Body ground
    Battery positive
    Always
    11 to 14 V
    If the result is not as specified, the DLC3 may have a malfunction. Repair or replace the harness and connector.