Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    63-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
63-78
An error occurs during the decode process (MP3 / WMA).
-

INSPECTION PROCEDURE

HINT:
After the inspection completed, clear the DTCs.

NOTICE:
  1. This code may be output even if there is no malfunction.
  2. If this code is output frequently, replace the navigation receiver assembly.

1.CLEAR DTC
  1. Clear the DTCs (Click here).

    HINT:
    These DTCs do not indicate a malfunction.


NEXT


2.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY
OK

END