Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > REMOVAL

for Preparation Click here



1. REMOVE REAR BUMPER COVER


    B067544E01
  1. Put protective tape under the quarter panel.

  1. Partially the fender liner.

    HINT:
    Do not remove the fender liner completely but partially so that the bumper cover can be removed.

  1. Remove the 2 screws and 8 clips.

  1. Using a screwdriver, disengage the claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.