Home › BODY › EXTERIOR › REAR DOOR GLASS WEATHERSTRIP

REAR DOOR GLASS WEATHERSTRIP > INSTALLATION

for Preparation Click here



1. INSTALL REAR DOOR GLASS WEATHERSTRIP
  1. Install the rear door glass weatherstrip.



2. INSTALL SLIDE DOOR WINDOW ASSEMBLY


    B067494
  1. Open the door glass until the bolts appear in the service holes.

  1. Install the window with the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install the hole plug.



    B067495E02
  1. Put the window frame rear lower in the original position and tighten the nut.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    B069208
  1. Install the window frame with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install the glass run.



3. INSTALL REAR DOOR GLASS RUN


4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


5. INSTALL SIDE TRIM BOARD COVER REAR


6. INSTALL REAR DOOR WINDOW FRAME SUB-ASSEMBLY


7. INSTALL REAR WINDOW SIDE GARNISH ASSEMBLY