Home › BODY › EXTERIOR › BACK DOOR OUTSIDE GARNISH

BACK DOOR OUTSIDE GARNISH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR OUTSIDE GARNISH


    B067629
  1. Install the back door outside opener switch with the 2 screws.



  1. Install the back door outside garnish with the 5 nuts and a clip.


    B067628

  1. Connect the licence light connector.



2. INSTALL LH BACK-UP LIGHT ASSEMBLY


    I035545E03
  1. Connect the connector.

  1. Install the back-up light assembly with the 4 nuts and 2 claws.



3. INSTALL RH BACK-UP LIGHT ASSEMBLY


    I035545E03
  1. Connect the connector.

  1. Install the back-up light assembly with the 4 nuts and 2 claws.



4. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


5. INSTALL BACK DOOR PULL STRAP


    B067784E01
  1. Install the pull strap with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 42 in.*lbf }

  1. Install the cover.



6. INSTALL BACK DOOR LH SIDE GARNISH


7. INSTALL BACK DOOR RH SIDE GARNISH


8. INSTALL POWER BACK DOOR ROD


9. INSTALL BACK DOOR CENTER GARNISH


    B067743
  1. Engage the 5 clips to install the back door center garnish.