HEATED OXYGEN SENSOR (for 4WD) > INSPECTION |
| 1. INSPECT HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
![]() |
Measure the resistance of the sensor.
| Tester Connection | Specified Condition |
| 1 (HT) - 2 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 1 (HT) - 4 (E1) | 10 kΩ or higher |
| 2. HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
![]() |
Measure the resistance of the sensor.
| Tester Connection | Specified Condition |
| 3 (HT) - 2 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 3 (HT) - 4 (E1) | 10 kΩ or higher |