Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › NO. 2 ULTRASONIC SENSOR

NO. 2 ULTRASONIC SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 ULTRASONIC SENSOR
  1. Connect the connector and install the No. 2 ultrasonic sensor.



2. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
  1. Install the No. 1 ultrasonic sensor retainer.



3. INSTALL REAR BUMPER COVER


    B067544E01
  1. Install the rear bumper cover with the 2 screws and 8 clips.