Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU

CLEARANCE WARNING ECU > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH


2. REMOVE COWL SIDE TRIM BOARD LH


3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER LH


    B066070E01
  1. Remove the 2 bolts <A>.

  1. Disconnect the hood lock control cable assembly.

  1. Disengage the 2 claws and 3 clips, and then remove the instrument panel finish panel sub-assembly lower LH.

  1. Disconnect the connectors.



4. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY


    B066071E01
  1. Remove the 4 bolts <A> and instrument panel safety pad insert sub-assembly No. 1.

  1. Disconnect the connector.



5. REMOVE CLEARANCE WARNING ECU


    E146348
  1. Disconnect each connector.

  1. Remove the nut and clearance warning ECU.