FRONT DOOR SPEAKER > REMOVAL |
| 1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH |
![]() |
Using a screwdriver, disengage the clip and claw, and remove the garnish.
| 2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG |
![]() |
Using a screwdriver, disengage the 3 claws and remove the bezel.
| 3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY |
![]() |
Remove the screw.
Using a screwdriver, disengage the clip and claw, and remove the armrest base panel upper together with the switch.
Disconnect the connector.
Remove the 3 screws and switch from the armrest base panel upper.
Using pliers, remove the 2 pins and armrest.
| 4. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY |
| 5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
![]() |
Remove the 3 screws and back frame plate.
![]() |
Remove the 2 cushion rubbers.
Remove the 2 screws and the clip A.
Using a screwdriver, disengage the other 9 clips.
Remove the trim board upward.
![]() |
Disconnect the 2 cables from the inside handle, as shown in the illustration.
Using a screwdriver, disengage the 10 hooks and remove the weatherstrip inner.
Remove the 2 screws and inside handle.
| 6. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 4 screws and front No. 1 speaker assembly.