NAVIGATION RECEIVER > INSTALLATION |
| 1. INSTALL NO.1 NAVIGATION BRACKET |
![]() |
Install the No.1 navigation bracket with the 4 screws.
| 2. INSTALL NO.2 NAVIGATION BRACKET |
![]() |
Install the No.2 navigation bracket with the 4 screws.
| 3. INSTALL INSTRUMENT CLUSTER FINISH PANEL UPPER |
![]() |
Install the instrument cluster finish panel upper with the 4 screws.
| 4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET |
![]() |
Connect the connector.
Install the navigation receiver assembly with bracket with the 4 screws.