FRONT SEAT ASSEMBLY (for Flat Type) > DISASSEMBLY |
| 1. REMOVE OCCUPANT CLASSIFICATION ECU |
Disconnect the 2 connectors from the occupant classification ECU.
![]() |
Using a screwdriver, remove the occupant classification ECU.
| 2. REMOVE FRONT SEAT CUSHION SHIELD INNER RH |
Remove the screw.
Using a screwdriver, disengage the claws and remove the cushion shield inner.
| 3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH |
Disconnect the connectors.
Remove the nut and inner belt assembly.
| 4. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH |
![]() |
Using a screwdriver, disengage the claws and remove the reclining adjuster release handle.
| 5. REMOVE FRONT SEAT CUSHION SHIELD RH |
Remove the screw.
Using a screwdriver disengage the claws and remove the cushion shield.
| 6. REMOVE FRONT SEAT TRACK COVER RH FRONT INNER |
Remove the clip, 2 screws and seat track cover front inner.
| 7. REMOVE FRONT SEAT TRACK COVER RH FRONT OUTER |
Remove the clip, 2 screws and seat track cover front outer.
| 8. REMOVE FRONT SEAT INNER RH ARMREST ASSEMBLY |
![]() |
Using a screwdriver, remove the armrest cap.
Remove the bolt and armrest assembly.
Remove the 2 washers and 2 spacers.
| 9. REMOVE FRONT SEATBACK SHIELD LH |
Using a screwdriver, disengage the claws and remove the reclining adjuster release handle.
Remove the screw and seatback shield.
| 10. REMOVE FRONT SEATBACK SHIELD RH |
| 11. REMOVE FRONT SEATBACK BOARD RH |
![]() |
Disengage the clips.
Remove the seatback board by pulling it out in the arrow mark direction shown in the illustration.
| 12. REMOVE FRONT SEATBACK SPRING ASSEMBLY |
Remove the 4 bolts and seatback spring assembly together with the seatback cover.
| 13. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY LH |
Remove the 2 bolts and seatback lock assembly.
| 14. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY RH |
Remove the reclining connecting pipe.
Remove the 2 bolts and seatback lock assembly.
| 15. REMOVE FRONT SEAT HINGE COVER LH |
Using a screwdriver, disengage the claws and remove the seat hinge cover.
| 16. REMOVE FRONT SEAT HINGE COVER RH |
| 17. REMOVE FRONT SEAT HEADREST SUPPORT |
![]() |
Disengage the claws and remove the 2 headrest supports.
| 18. REMOVE FRONT SEATBACK COVER RH |
![]() |
with Side airbag:
Remove the nut and disengage the separate type front seatback cover bracket.
Remove the hog rings and seatback cover together with the pad.
Remove the hog rings and seatback cover.
| 19. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
Disengage the hook and remove the seat cushion cover together with the pad.
Remove the hog rings and seat cushion cover.
| 20. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Remove the screw and the reclining adjuster inside cover LH (lower).
| 21. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
| 22. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Remove the screw and the reclining adjuster inside cover LH (upper).
| 23. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
| 24. REMOVE FRONT SEAT CUSHION SHIELD LOWER LH |
![]() |
Using a screwdriver, disengage the claws and remove the front seat cushion shield lower LH.
| 25. REMOVE FRONT SEAT CUSHION SHIELD LOWER RH |